how to make a hooded towel::This pleat is totally optional but just gives the towel some shape and makes it easier to wrap around little bodies how to make a hooded towel

how to make a hooded towel::This pleat is totally optional but just gives the towel some shape and makes it easier to wrap around little bodies.
Fold your towel in half lengthwise and mark with a pin.
Then measure out 4 inches on either side of the pin and mark with more pins.
Then fold the towel where the pin on the right is and fold it towards the center pin.
Do the same with the left pin.
Secure the 2 folds in place with more pins.
Then, fold your hand towel in half lengthwise.
Then, cut a curve into the top left corner.
Then zigzag right next to it, to secure this seam in place.
Trim off the excess material.
Onto the little bear ears.
Then, from your scraps, cut out 2 pieces that are 3.
Sew in half lengthwise.
Then turn right side out and place the seam up.
Press flat with your hand.
Then fold the tube in half, with the seam always laying face up.
Over lap the ends a little bit and match up the raw edges.
Then sew into place onto the towel.
Then can you see how the little ears have holes through them?
Just stitch that opening closed using the whip stitch from tutorial.
Then, lay the main section of your towel down, with the pleat face up.
Lay the bottom of the hood against the main section of the towel, with right sides together.
Make sure the center of the pleat is lined up with the center seam of the hood.
Okay, maybe it looks like too.
Handstitch the back of the ear all bunched together instead of in a straight line.